Skip to content

ADVANCED PROTONIC CELLS

About the
project

PROJECT OVERVIEW

PCCEL

Proton Conducting
Ceramic Electrolyser

Ceramic electrolysis for renewable hydrogen.

PROCEED (PROton Conductive Electrolysis with Enhanced Durability) is a Horizon Europe project funded by the Clean Hydrogen Joint Undertaking that aims to accelerate the development and industrial adoption of Proton Conducting Ceramic Electrolyser (PCCEL) technology for the production of high-purity renewable hydrogen. The project addresses key challenges related to efficiency, durability, scalability and manufacturing cost, contributing to Europe's ambition of producing 10 million tonnes of renewable hydrogen annually by 2030.


How the technology works

Unlike conventional low-temperature electrolysers, PCCEL technology operates at an intermediate temperature and uses a proton-conducting ceramic electrolyte. This approach has the potential to reduce electricity demand, make use of available heat and produce high-purity hydrogen efficiently. PROCEED will address the remaining technical and manufacturing challenges that currently limit its deployment at a larger scale.


What PROCEED develops

PROCEED will develop and validate an innovative PCCEL system based on advanced metal-supported cells, novel protective coatings and an integrated Balance of Plant (BoP). By combining material innovation, advanced manufacturing, digital modelling and sustainability assessment, the project aims to establish a new generation of highly efficient and cost-effective hydrogen electrolysis systems.

Why

?

Renewable hydrogen is expected to play a crucial role in decarbonising hard-to-abate sectors such as industry, transport and energy storage.

THE CHALLENGE

However, current electrolysis technologies still face challenges related to cost, durability, critical raw material dependency and large-scale deployment.

PROCEED addresses these barriers by developing advanced PCCEL technology capable of:

PERFORMANCE & RESOURCES


Producing green hydrogen more efficiently


Reducing the use of critical raw materials


Improving long-term operational durability

SCALABILITY & INDUSTRIAL UPTAKE


Enabling scalable and industrially viable manufacturing routes


Supporting Europe's technological leadership in clean hydrogen technologies

Project objectives

Five priorities guiding the research programme.

01

TECHNOLOGY

Develop next-generation proton-conducting ceramic electrolysis technology

PROCEED aims to advance Proton Conducting Ceramic Electrolyser (PCCEL) technology beyond the current state of the art by developing innovative cell and stack designs that combine high efficiency, durability and cost-effectiveness. The project will focus on metal-supported electrochemical cells and advanced materials capable of operating under demanding industrial conditions while maintaining high hydrogen production performance. Through these developments, PROCEED seeks to unlock the full potential of PCCEL technology as a key solution for renewable hydrogen generation.

02

DURABILITY

Improve durability and operational reliability

A major challenge for the large-scale deployment of electrolysis technologies is ensuring long-term stability and reliable operation. PROCEED will investigate degradation mechanisms affecting cell and stack performance and develop mitigation strategies based on advanced coatings, materials engineering and predictive modelling. By improving resistance to degradation and thermal stresses, the project aims to significantly extend system lifetime and reduce maintenance requirements, making hydrogen production more economically attractive.

03

MANUFACTURING

Enable industrial-scale manufacturing

To support future commercial deployment, PROCEED will develop manufacturing processes that can be scaled from laboratory production to industrial manufacturing. The project will optimise fabrication routes for key components, improve production efficiency and explore advanced manufacturing techniques, including innovative deposition methods and additive manufacturing solutions. These activities will help create a robust pathway towards cost-competitive and large-scale production of PCCEL systems in Europe.


04

SYSTEM DEMONSTRATION

Demonstrate efficient and integrated hydrogen production systems

PROCEED will design, build and validate a complete PCCEL system at the 20 kW scale, integrating advanced stacks with an optimised Balance of Plant (BoP). Particular attention will be given to system integration, heat management, steam distribution and operational optimisation in order to maximise overall efficiency. The demonstration activities will provide valuable evidence of the technology's readiness for industrial applications and future scale-up.

05

INDUSTRIAL COMPETITIVENESS

Support Europe's hydrogen transition and industrial competitiveness

Beyond technological development, PROCEED will assess the environmental, economic and societal benefits of the proposed solutions through comprehensive life-cycle and techno-economic analyses. The project will establish clear pathways for industrial uptake and market deployment, contributing to the objectives of the European Hydrogen Strategy, REPowerEU and the European Green Deal. By strengthening European expertise and innovation capacity in hydrogen technologies, PROCEED will help reinforce Europe's leadership in the transition towards a climate-neutral economy.

Expected results

PROCEED will deliver a set of technological, environmental and economic results covering the full development path of proton-conducting ceramic electrolysis: from materials and individual cells to stacks, system integration and future industrial deployment.

2

short-stack
configurations

EXPECTED RESULT 01

Two validated PCCEL short-stack configurations

The project will develop and test two short-stack concepts based on different manufacturing approaches.


Automated production line

The first will be designed for compatibility with an existing automated production line, helping to reduce manufacturing complexity and support future mass production.


Advanced 3D printing

The second will use advanced 3D-printing techniques to integrate metal supports and interconnects, improve gas and temperature distribution and simplify the overall stack architecture.

RESULTS 02–05

Materials, cells
and systems

02

Improved materials and protective coatings

Materials and coatings to reduce degradation, protect metallic components and limit critical raw materials.

PROCEED will develop materials and coatings capable of maintaining strong electrochemical performance under demanding operating conditions. These solutions will aim to reduce degradation, protect metallic components and limit the use of critical raw materials, contributing to more durable and resource-efficient electrolysers.

03

Better understanding and prediction of degradation

Testing, modelling and machine learning to understand performance loss and extend cell and stack lifetime.

Experimental testing, modelling and machine-learning methods will be combined to identify the main causes of performance loss. This knowledge will support the development of mitigation strategies and more effective operating conditions, with the aim of extending cell and stack lifetime.

04

Scalable manufacturing processes

Production processes for large-area cells and components, designed for future industrial manufacturing.

The project will optimise the production of large-area metal-supported cells and related stack components. Conventional and innovative manufacturing methods will be assessed to improve material use, production consistency and compatibility with future industrial-scale manufacturing.

05

A compact and optimised balance of plant

An integrated balance of plant focused on heat recovery, steam management and system efficiency.

PROCEED will design an integrated balance of plant adapted to the operating requirements of PCCEL technology. Particular attention will be given to heat recovery, steam generation and distribution, temperature management and overall system efficiency.

06 / EXPECTED RESULT

20

kW

TO BE EVALUATED

Hydrogen production

Energy demand

Operational stability

Long-term performance

A fully integrated 20 kW prototype

The project will bring its different technological developments together in a 20 kW prototype. The prototype will be tested under relevant operating conditions to evaluate hydrogen production, energy demand, operational stability and long-term performance. It will provide evidence of the technology’s potential for further scale-up and industrial application.

INDUSTRIAL PERSPECTIVE

07 / EXPECTED RESULT

Environmental and economic assessment

Life-cycle, life-cycle cost and techno-economic analyses will be carried out to evaluate the environmental impact, resource use and expected hydrogen-production costs of the proposed solutions. The assessments will also consider the use of critical raw materials, recycling possibilities and opportunities to reduce impacts across the system’s life cycle.

08 / EXPECTED RESULT

A pathway towards industrial deployment

The technical and assessment results will be used to prepare roadmaps for scale-up, industrialisation and market deployment. These roadmaps will identify the further development, investment and demonstration steps needed to move PCCEL technology towards commercial applications.


Together, these results will provide the technical, environmental and economic evidence needed to evaluate PCCEL as an efficient, durable and scalable option for renewable-hydrogen production. They will also contribute to strengthening European knowledge and manufacturing capacity in advanced electrolysis technologies.

EUROPEAN FUNDING

The project is supported by the Clean Hydrogen Partnership and its members.